The resistance of your rowing machine impacts how it moves. Select from hydraulic and magnetic rowing resistance. Hydraulic rowers are typically more compact in size, while magnetic machines make little noise as they operate. Details like easy-to-reach tension knobs or buttons allow you to increase or decrease the intensity of your resistance as you train.
This popular rowing machine utilizes magnetic resistance for a quiet, and very smooth workout. The Velocity Exercise CHR-2001 also features a programmable computer with 12 programs that will keep your exercising varied and challenging for years. The computer also provides data on distance, time, calories burned, pulse rate, strokes per minute, and stroke count. Additionally, the tension resistance is electronically controlled via the computer.  This electronic resistance control feature puts the CHR-2001 ahead of other magnetic rowers that tend to use knobs.

Variability between machines is of small importance if one machine is used consistently for fitness and training, such as in a home gym. It will still provide a sufficiently reliable measure of one's progress. In a competition setting however, equivalence between machines is essential. An example will clarify: Consider the entirely reasonable possibility that the elastic cord of one machine requires 7 pounds of force to stretch, and the elastic cord of another machine requires 6 1/2 pounds of force to stretch. Now suppose that two competitors, one on each of these machines, complete a 2000M race in 8 minutes at an average stroke rate of 30 strokes per minute. The competitor on the machine with the elastic cord tensioned to 7 pounds will need to pull with 1/2 pound more force for the duration of each stroke than the other competitor in order to obtain the same monitored results (since, as explained, only the energy expended to spin the flywheel is measured, not the energy to stretch the elastic cord). If each stroke averages 5 feet in length, and it takes 240 strokes (8X30) to complete the race, the extra work done by the one competitor is equivalent to lifting a 1/2 pound weight through a vertical distance of 1200 feet (5X240), or put another way, the extra work required by this competitor is equivalent to lifting a 10 pound weight through a vertical distance of 60 feet. However, in this example, despite the difference in energy output by the competitors, the monitor displays are the same.
This affordable rowing machine is streamlined, simple to use, built well, has a comfy seat with a realistic rowing movement, and especially good for a newbie. Because the cost of this machine is less than $150, it is popular on the net. As it has a hydraulic rower, resistance is provided by just one piston under the main key column. Along with a comfy cushioned seat, LCD screen, this machine provides 12 hydraulic cylinder resistances.
John Duke, creator of the WaterRower, was inspired to try his hand at invention while working at a subsidiary for U.S. Steel. He wanted to make an indoor machine that felt as much like real rowing as possible, with a focus on aesthetics. It took him two years to get the design right, moving past failed ideas such as a flipper in the tank instead of a clutch. What began as a series of doodles at his desk turned into a sculptural piece of exercise equipment that upends expectations in two ways: by bringing water indoors, and by looking elegant and artful when stored.
Yes! The mother of indoor rowing competitions is the CRASH-B Sprints, held annually in Boston. The Charles River All-Star Has-Beens started when the U.S. boycotted the Olympics in 1980 — during the same era that Concept 2 launched their Model A; necessity met opportunity. CRASH-B is still held with aplomb and doesn’t require any special qualification of its applicants.

Machines with a digital display calculate the user's power by measuring the speed of the flywheel during the stroke and then recording the rate at which it decelerates during the recovery. Using this and the known moment of inertia of the flywheel, the computer is able to calculate speed, power, distance and energy usage. Some ergometers can be connected to a personal computer using software, and data on individual exercise sessions can be collected and analysed. In addition, some software packages allows users to connect multiple ergometers either directly or over the internet for virtual races and workouts.
On a rowing machine, you don’t want to be wearing clothes that are too baggy as the fabric can get caught between the seat and the beam it slides on.  It’s not a disaster if that happens, but it can get annoying if your shorts keep getting caught there while you’re trying to get a serious workout.   It’s better to wear shorter, tighter-fitting shorts (nothing ridiculous), but just enough to ensure it doesn’t the material doesn’t hang down.
If you are anything like me, you read the negative reviews to see what some of the complaints could potentially be...I have found none that match with my machine or experience so far. The boxes it came in were a little bunged-up but everything on the inside was perfect. Only took about 15-20 minutes to build (first time building a row machine) and another 5-10 to fill with water. We used it for a little while before we added the danish oil.
The most commonly damaged piece of rowing equipment is the skeg, which is a metal or plastic fin that comes out of the bottom of the boat to help maintain stability, and to assist in steering. Since the skeg sticks out below the hull of the boat it is the most vulnerable to damage, however it is relatively easy to replace skegs by gluing a new one on. Hull damage is also a significant concern both for maintaining equipment, and for rower safety. Hull damage can be caused by submerged logs, poor strapping to trailers, and collisions with other boats, docks, rocks, etc.
A rowing workout can produce sustainable results without negatively impacting muscles and joints. With a reported average of five hundred to a thousand calories burned per workout, rowing machines are the hottest new fitness trend in the industry. Because of this, manufacturers are working overtime to produce a wide variety of styles and types of row machines, all of which can offer an effective low-impact total body workout. With so many choices of models, it can be confusing for beginners to choose the right type. Most consumers automatically choose the cheapest rower, however, cheaper models often feature piston resistance, which is considered the worst type of technology because the workouts are uncomfortable and the machine itself is often poorly designed.
Perhaps one of the best rowing machine benefits is the workout they give the lower body. In fact, rowing enthusiasts consider rowing primarily a lower-body workout. The main leg muscles involved are the quads in the upper front of the thighs, however the calves and glutes (buttocks) also feel the burn. Building strong legs and glutes will help you look amazing and working out the lower body actually burns calories at a faster rate. In addition to improved muscle strength and tone, resistance training on a row machine is a great way to maintain flexibility and balance.
One of the underrated advantages of treadmills and bikes is that they attempt to replicate something with which most people are already familiar—walking, running, or biking. The barriers to entry are low, and the task of planning and completing a workout is a little more intuitive, since most people know what those activities feel like. Those heuristics are out the door with a rowing machine, though. Do you just... pull? How far? How hard? And why does it insist on measuring distance in meters? We asked Caley Crawford, the Director of Education at Row House, for tips on getting started so that, hopefully, your experience doesn't end with you throwing your hands up in frustration and crawling back to the elliptical room.
It's cool that you can reach really far forward and pull really far backward, but focusing on getting the longest possibles strokes risks "over-compression," explains Crawford, a condition that causes knee pain by transferring the load to the quads. Hamstrings and glutes are the big muscles here, and you want them doing the big work. Be sure to keep your core braced, and when you lean forward, stay closer to 1 o'clock than 3 o'clock.
"Angela, you are one heck of a coach! While I've never had any ill-feelings toward the erg, I've definitely gained a new found respect for everything that goes into proper technique on it and think I've got a pretty good handle on how to handle the beast that is the erg. Likewise, I feel confident enough to teach it to others now. The on-water experience also changed my outlook on rowing as a whole. I had a blast out there, and am planning on getting back on the water in the next couple of weeks. You may have created a monster! Thank you again for coaching this certification despite its low turnout, but I think everyone that attended appreciated the extra attention they received due to the intimacy of the class size"
The drive is initiated by the extension of the legs; the body remains in the catch posture at this point of the drive. As the legs continue to full extension, the rower engages the core to begin the motion of the body levering backward, adding to the work of the legs. When the legs are flat, the rower begins to pull the handle toward the chest with their arms while keeping their arms straight and parallel to the floor.
If you are accustomed to the natural catch and feel of on-water rowing, your rowing technique will immediately appreciate the Apollo’s unrivalled emulation of a boat gliding through water. FDF’s patented twin tank design generates a smooth uniform stroke, including no lag of resistance at the catch and continued resistance all the way to the finish.
 The amount of water in the tank simulates the weight of the boat and crew, the more water in the tank the heavier the boat and crew. The standard Calibration Level is Level 17. If the user is lighter in weight, Level 15-16 can be used. If the user is heavier in weight, level 18-19 can be used. The maximum level to fill the tank is Level 19. DO NOT fill above the maximum level – this could void the warranty.

Head races are time trial / processional races that take place from autumn (fall) to early spring (depending on local conditions). Boats begin with a rolling start at intervals of 10 – 20 seconds, and are timed over a set distance. Head courses usually vary in length from 2,000 metres (1.24 mi) to 12,000 metres (7.46 mi), though there are longer races such as the Boston Rowing Marathon and shorter such as Pairs Head.


I don't know how this machine compares to others. I have no idea. Here's what I know: I've had treadmills and elliptical machines, weight benches and several exercise appliances from infomercials. They all work exactly like they should if you use the equipment on a consistent basis. That's where the problem comes in. I would always give up eventually and the machine would sit in the corner, covered with my laundry, laughing at me. I bought this rower without ever even trying one at the gym because I was desperate to do something (and I voted for Frank Underwood). This was the one machine I was not only able to stick with, but I now eagerly look forward to using. It started a chain reaction that changed everything. You know those incredible before/after transformation pictures you see on weight loss shows? I'm one of those guys now. Rowing is like a 'secret' in the fitness world in the way there is so little emphasis. However, in terms of results, it is so much more efficient. It works your upper and lower body at the same time, huge cardio/fat burner and builds muscle like crazy. I'm glad I'm in on the secret too.
Ergometer rowing machines (colloquially ergs or ergo) simulate the rowing action and provide a means of training on land when waterborne training is restricted, and of measuring rowing fitness. Ergometers do not simulate the lateral balance challenges, the exact resistance of water, or the exact motions of true rowing including the sweep of the oar handles. For that reason ergometer scores are generally not used as the sole selection criterion for crews (colloquially "ergs don't float"), and technique training is limited to the basic body position and movements. However, this action can still allow a comparable workout to those experienced on the water.
The Classic Rowing Machine is designed is extremely easy to use. Additionally, it has a lot of comfort features in its design. It has an ergonomically shaped handle and padded heel rests that accommodate nearly everyone. Everything on the machine can be adjusted quickly. Because there are no movement parts, maintenance is minimal. Even the computer has a lot of one button operations, so the minute you have the rower assembled, you can get to work.
The large display console allows you to keep track of the calories burned, distance covered, strokes per minute and duration of the workout. The Newport also includes an improved seat roller design for a smoother glide. The ergonomic padded seat will keep you comfortable and encourage longer workouts while the rust-resistant rail system is made to prevent scuffing as you push yourself during an intense session.

All rowing-machine designs consist of an energy damper or braking mechanism connected to a chain, strap, belt and/or handle. Footrests are attached to the same mounting as the energy damper. Most include a rail which either the seat or the mechanism slide upon. Different machines have a variety of layouts and damping mechanisms, each of which have certain advantages and disadvantages.
The “split” refers to how much time it would take you to cover 500 meters if you maintain that split. For example, if you are holding a 1:45 split, then it will take you 1 minute, 45 seconds to cover 500 meters. “It’s a great way to see if your training (and technique) is paying off with improved splits,” says Frandsen. You are able to program your workout in by going to “Select Workout,” then “New Workout,” and then inputting your work intervals based on time or distance, as well as your rest interval.
NordicTrack creates machines that work in gyms and at home nationwide. If Peloton and Concept 2 were to have a baby, you’d get the RW900. Your first year of an iFit membership, which can be used on the RW900, is free, so you can enjoy workouts from trainers like Alex Silver-Fagan and Jay Wein that range from 10 to 60 minutes. And it’s not just rowing workouts. Thanks to the iFit app, you can pick from cross training, boot camp, HIIT and active recovery workouts — both on and off the rower. The digital screen transports you to the Olympic Training Center in San Diego, where Susan Francia, two-time Olympic gold medalist, leads you in a workout. Whereas the entry-level RW200 uses air resistance to challenge you, the RW900 uses a magnetic resistance that’s quiet and tough, in addition to the air resistance. You can pick up the RW200 today (for just $599), or wait for the RW900 which ships in December.
This type of calorie burn is better than what you would get from cycling or running, and it’s much gentler on the body. You can also position your hands differently in order to work new muscle groups in your lower and upper arms. Many people will be surprised to learn that rowing works the legs more than any other muscle group, but by switching up your rowing position, you can also focus on your abs, arms and shoulders for a total upper body workout that can provide impressive results just by working out a few times a week.
The Rekers rowing ergometer (referenced above) is described in the title of the patent document as "dynamically balanced", rather than simply "dynamic", as is common among users. "Dynamically balanced" is the accurate description, for the following reason: During the drive portion of the stroke, since the sliding carriage to which the footrests are attached, and the sliding seat, can both move independently fore and aft on a rail or rails, therefore the straightening of the user's legs causes the footrests to slide forward, and simultaneously causes the seat to slide rearward. However, since the combined mass of the seat and user is considerably greater than the combined mass of the footrests and sliding carriage (and flywheel, if it is part of the sliding footrests assembly), therefore the rearward movement of the seat and user, relative to ground, is much less than the forward movement of the footrests and carriage assembly, relative to ground. During the recovery portion of the stroke, this difference in mass has the same effect. The sliding footrests carriage, and the sliding seat carrying the user move proportionately the same distances relative to ground as during the drive as they return to their starting positions. Thus, during use, the combined mass of the footrest and sliding carriage, and the combined mass of the user and sliding seat, move towards and away from each other, as they oscillate about their common centre of gravity. To ensure the linked movement of these two masses remain centred on the device, the rail or rails upon which they slide are sloped upward slightly at their front and rear ends. Alternatively, elastic cords or springs attached to the seat and footrests can ensure such centering.
Variability between machines is of small importance if one machine is used consistently for fitness and training, such as in a home gym. It will still provide a sufficiently reliable measure of one's progress. In a competition setting however, equivalence between machines is essential. An example will clarify: Consider the entirely reasonable possibility that the elastic cord of one machine requires 7 pounds of force to stretch, and the elastic cord of another machine requires 6 1/2 pounds of force to stretch. Now suppose that two competitors, one on each of these machines, complete a 2000M race in 8 minutes at an average stroke rate of 30 strokes per minute. The competitor on the machine with the elastic cord tensioned to 7 pounds will need to pull with 1/2 pound more force for the duration of each stroke than the other competitor in order to obtain the same monitored results (since, as explained, only the energy expended to spin the flywheel is measured, not the energy to stretch the elastic cord). If each stroke averages 5 feet in length, and it takes 240 strokes (8X30) to complete the race, the extra work done by the one competitor is equivalent to lifting a 1/2 pound weight through a vertical distance of 1200 feet (5X240), or put another way, the extra work required by this competitor is equivalent to lifting a 10 pound weight through a vertical distance of 60 feet. However, in this example, despite the difference in energy output by the competitors, the monitor displays are the same.
This type of calorie burn is better than what you would get from cycling or running, and it’s much gentler on the body. You can also position your hands differently in order to work new muscle groups in your lower and upper arms. Many people will be surprised to learn that rowing works the legs more than any other muscle group, but by switching up your rowing position, you can also focus on your abs, arms and shoulders for a total upper body workout that can provide impressive results just by working out a few times a week.
* While there is nothing to adjust from row to row on the WaterRower, it is possible to increase or decrease the level of resistance by changing how much water you put in the drum. The monitor is pre-calibrated to match 17 liters of water, but you can change that if you want. More than 17 liters = more resistance, up to the max fill line. This is not something you'll want to change frequently, it's more of a set-it-and-forget-it thing.
At its founding, it had nine clubs; today, there are 12: Fairmount Rowing Association, Crescent Boat Club, Bachelors Barge Club, University Barge Club, Malta Boat Club, Vesper Boat Club, College Boat Club, Penn Athletic Club Rowing Association (Penn AC), Philadelphia Girls' Rowing Club (PGRC), Gillin Boat Club and St. Joseph's University and St. Joseph's Prep. At least 23 other clubs have belonged to the Navy at various times.[23] Many of the clubs have a rich history, and have produced a large number of Olympians and world-class competitors.[26]
"I want to send you the HUGEST thank you for sending Angela to us for this rowing clinic. I can't express how invaluable it's been for our clients, and especially for our trainers, today. It was EXACTLY what I was looking for and has exceeded my hopes and expectations. I wish I could keep her here longer so we could keep soaking her knowledge up and keep getting coached!"
In the 1970s, the Gjessing-Nilson ergometer from Norway used a friction brake mechanism with industrial strapping applied over the broad rim of the flywheel. Weights hanging from the strap ensured that an adjustable and predictable friction could be calculated. The cord from the handle mechanism ran over a helical pulley with varying radius, thereby adjusting the gearing and speed of the handle in a similar way to the changing mechanical gearing of the oar through the stroke, derived from changes in oar angle and other factors. This machine was for many years the internationally accepted standard for measurement.

Piston resistance comes from hydraulic cylinders that are attached to the handles of the rowing machine.[6] The length of the rower handles on this class of rower is typically adjustable, however, during the row the handle length is fixed which in turn fixes the trajectory that the hands must take on the stroke and return, thus making the stroke less accurate than is possible on the other types of resistance models where it is possible to emulate the difference in hand height on the stroke and return. Furthermore, many models in this class have a fixed seat position that eliminates the leg drive which is the foundation of competitive on water rowing technique. Because of the compact size of the pistons and mechanical simplicity of design, these models are typically not as large or as expensive as the others types.


The water flywheel is comprised of two paddles encased in an enclosed tank of water. As you pull the cable, the paddles move through the water creating resistance. The beauty of this machine is it uses the mass/density of water. The paddles create the drag, so the harder you pull, the more resistance increases. Think about moving your hands through water. The faster you go, the more dense water feels. The slower you go, the less you feel the resistance. And this type of resistance is excellent for your joints. Click here to read the full review.
Because of the vast array of products that might contain one of the chemicals or ingredients on the list, we must include Proposition 65 warnings in our communications with you. We are required to use exact wording as specified by the state of California. While the warning sounds alarming, the purpose is to notify you of the potential risk so that you can make an informed buying decision.
Indoor rowing primarily works the cardiovascular systems with typical workouts consisting of steady pieces of 20–40 minutes, although the standard trial distance for record attempts is 2000 m, which can take from five and a half minutes (best elite rowers) to nine minutes or more. Like other forms of cardio focused exercise, interval training is also commonly used in indoor rowing. While cardio-focused, rowing also stresses many muscle groups throughout the body anaerobically, thus rowing is often referred to as a strength-endurance sport.
One downside of the Waterrower for me are the footrests. Whilst they are perfectly adequate if you want to row in shoes, rowing barefoot, which is something I like to do, is impossible. The plastic is completely square at the bottom and has sharp edges that cut into your heels. I also found that my shoes get caught when trying to put them in and out of the holders, which is a bit irritating.
No matter what your age is, a fitness plan that includes cardio (or aerobic exercise) is an important contributor to your overall health. The benefits of regular aerobic exercise include weight loss, increased stamina, and a stronger immune system. Endorphins released while you work out can also help improve your mood and sleep quality. Because it requires the use of so many major muscle groups, a rowing machine is an effective way to raise your heart rate and increase your oxygen intake for an effective cardio workout. The adjustable resistance on most rowers lets you easily work up to your target heart rate as well as slow back down to your resting rate.

Absolutely beautiful piece of functional furniture. I use this rower 3-5 times per week. The display is a little awkward and not nearly as advanced as the competition but for anyone short of a pro, it provides all the basic functions you could want. I've used plenty of rowers in gyms but this was my first purchase for home use. It was an excellent alternative to running outdoors in the winter and as an alternative to running when the legs need a little more recovery time. I have it set in the middle of it's resistance range and it is still plenty challenging. So there is a ton of adjustability in that regard. It's not quickly changed but for a single user device this doesn't matter. It's a different feeling than an air fan but I really like it.
"This is Lauren Ruck. I met you at the Flagstaff rowing clinic, and had dinner with you at the Ray's. I just wanted to say thanks again for coming out. You did such a wonderful job. The gym was buzzing for days about you and how great a time they had. You are a talented coach, and a great motivator. As a trainer myself I am always watching other coaches to see how they train and interact with a group. You have a wonderful way of engaging the group, keeping everyone's attention, and keeping the mood fun. I think that is the one thing that really stood out about you was the positive way you spoke to everyone. You had a way of being focused yet still light hearted. It was inspiring watching you coach, thank you."
In the rowing machine category, there are a lot of models to chose from. They range in price from under $100 to well over $1500.  As you can imagine, you’re getting a different type of row machine at those ends of the spectrum, but within that variety there’s something for everyone.  To help guide you, we’ve listed our favorite row machine models and brands by price below:
The WaterRower US office got in on the Pull for a Cure fundraising action and all pulled together to raise money for breast cancer! - - - - As many of you may already know, throughout the month of October, WaterRower has been raising money through our Pull for a Cure fundraiser. For each 500m workout rowed and posted online, we'll be donating $1 towards breast cancer research! Don't forget to get your workouts in before Monday, October 31st! #PullForaCure #WaterRower
Although some rowing machines are made of space-age, super-sweat-resistant metals, you still want to wipe off the equipment after a sweaty workout.  These machines are usually constructed with a lot of various materials and salty sweat can be very corrosive.  Keeping your rowing machine clean can go a long way toward extending its life, and its appearance.
The Verified Sustainable Hardwoods used for the WaterRower are sourced from the Appalachian Mountain region of the eastern United States, where planting rates exceed harvest rates by an average multiple of 2.29. The Appalachian Hardwood Timber resource includes more than 65.4 million acres in the eastern United States and provides the world with a bounty of the finest hardwood species.
Rowers may take part in the sport for their leisure or they may row competitively. There are different types of competition in the sport of rowing. In the U.S. all types of races are referred to as regattas whereas this term is only used in the UK for head-to-head or multi-lane races (such as those that take place at Dorney Lake), which generally take place in the summer season. Time trials occur in the UK during the winter, and are referred to as Head races. In the US, head races (usually about 5k, depending on the body of water) are rowed in the fall, while 2k sprint races are rowed in the spring and summer.

Rowing has long been recognized as the perfect aerobic pursuit, with naturally smooth and flowing movements that don't tax the joints but do boost the heart rate. Now you can take your rowing experience to the next level with the WaterRower Natural rowing machine. Using the same principles that govern the dynamics of a boat in water, the WaterRower Natural is outfitted with a "water flywheel" that consists of two paddles in an enclosed tank of water that provide smooth, quiet resistance, just like the paddles in an actual body of water. As a result, the machine has no moving parts that can wear out over time (even the recoil belt and pulleys don't require lubricating or maintaining). More significantly, the water tank and flywheel create a self-regulating resistance system that eliminates the need for a motor. As with real rowing, when you paddle faster, the increased drag provides more resistance. When you paddle slower, the resistance is less intense. The only limit to how fast you can row is your strength and your ability to overcome drag. And unlike conventional rowing machines, which tend to be jerky and jarring, the WaterRower Natural is remarkably smooth and fluid.
×