A 125-pound person moving at an average pace for 30 minutes on a treadmill will burn roughly 250 calories. However, they aren’t able to take advantage of this after-burn effect. The same person rowing vigorously will burn around to 250 calories but will have less stress placed upon their joints and continue to burn calories after the workout has ended. Rowing machines have been shown to burn on average 800 calories an hour if you work harder and are slightly heavier.
The oldest, and arguably most famous, head race is the Head of the River Race, founded by Steve Fairbairn in 1926 which takes place each March on the river Thames in London, United Kingdom. Head racing was exported to the United States in the 1950s, and the Head of the Charles Regatta held each October on the Charles River in Boston, Massachusetts, United States is now the largest rowing event in the world. The Head of the Charles, along with the Head of the Schuylkill in Philadelphia and the Head of the Connecticut, are considered to be the three “fall classics.”[40]
Unlike the 1445, the Elite Wave Water Rowing Machine includes an upgraded, high-end fitness monitor and a chest strap heart rate sensor. Programmed to sync seamlessly with the multi-function monitor, the data the sensor provides allows you to tailor your workout. For example, you can target a certain heart rate for weight loss or to increase endurance by adjusting your rowing speed and therefore, your rowing intensity. In addition to pulse, the multi-function monitor also tracks distance, time, calories burned, stroke count and strokes per minute to further motivate you during your rowing session. For further customization, users can also add or remove water using the included siphon to either increase or decrease the resistance.

A feature of the end of twentieth century rowing was the development of non-olympic multicrew racing boats, typically fixed seat-gigs, pilot boats and in Finland church- or longboats. The most usual craft in races held around the coasts of Britain during summer months is the Cornish pilot gig, most typically in the south-west, with crews of 6 from local towns and races of varying distances. The Cornish pilot gig was designed and built to ferry harbour and river pilots to and from ships in fierce coastal waters. The boat needed to be stable and fast with the large crew hence making it ideal for its modern racing usage. In Finland 14-oared churchboats race throughout the summer months, usually on lakes, and often with mixed crews. The largest gathering sees over 7000 rowers mainly rowing the 60 kilometres (37 mi) course at Sulkava[38] near the eastern border over a long weekend in mid July. The weekend features the World Masters churchboat event which also includes a 2 kilometres (1.24 mi) dash.[39]


Head races are time trial / processional races that take place from autumn (fall) to early spring (depending on local conditions). Boats begin with a rolling start at intervals of 10 – 20 seconds, and are timed over a set distance. Head courses usually vary in length from 2,000 metres (1.24 mi) to 12,000 metres (7.46 mi), though there are longer races such as the Boston Rowing Marathon and shorter such as Pairs Head.
No matter what your age is, a fitness plan that includes cardio (or aerobic exercise) is an important contributor to your overall health. The benefits of regular aerobic exercise include weight loss, increased stamina, and a stronger immune system. Endorphins released while you work out can also help improve your mood and sleep quality. Because it requires the use of so many major muscle groups, a rowing machine is an effective way to raise your heart rate and increase your oxygen intake for an effective cardio workout. The adjustable resistance on most rowers lets you easily work up to your target heart rate as well as slow back down to your resting rate.

Blades, otherwise known as oars to amateurs or non rowers, are used to propel the boat. They are long (sculling: 250–300 cm; sweep oar: 340–360 cm) poles with one flat end about 50 cm long and 25 cm wide, called the blade. Classic blades were made out of wood, but modern blades are made from more expensive and durable synthetic material, the most common being carbon fiber.

I teach pilates and also have several pieces of cardio equipment for my clients to warm up on. I bought a Hi, Rise Club Water Rower model a few years ago . as it turns out, my hard core bikers and elliptical walkers really did not use the Rower. SO it is in great shape. A beautiful piece.  I could not get a good photo in my house as there was not enough light, but if you Google this, you can see just what it looks like. 

Not a lot to complain about on the Classic rower, but when searching for drawbacks of this rowing machine, the S4 Monitor is the one thing that occasionally comes up.  It’s rather basic and it isn’t backlit. Regardless, the monitor has all necessary tracking and features for getting an excellent workout, and in normal lighting there is no problem reading the display.


Just because you don’t live on the water with a rowing boat sitting at the dock doesn’t mean you can’t enjoy the same physical benefits from rowing. You can purchase an affordable rower to use in the comfort and convenience of your own home. Sometimes getting motivated to work out is more challenging than the exercise itself. Uncomplicated and accessible workouts, like rowing, are much more appealing. It’s also great, because you can recruit a workout buddy to join you for added encouragement.
Most races that are held in the spring and summer feature side by side racing, or sprint racing, sometimes called a regatta; all the boats start at the same time from a stationary position and the winner is the boat that crosses the finish line first. The number of boats in a race typically varies between two (which is sometimes referred to as a dual race) to eight, but any number of boats can start together if the course is wide enough.

Function plays a large role in defining good design. When designers look at an object, they don't just consider its aesthetic appearance; they should also challenge it to be more versatile, to respond to the user's need, or to achieve its purpose more elegantly. Good design has the capacity to solve problems that sometimes we didn't even know we had. This is one of the ways design touches and enriches our everyday life.

1.) I keep reading about cracks and leaks that develop in the water tank. WaterRower even offers a tank repair kit for this very issue. It seems to me that this is a design flaw that they refuse to address, instead offering a fix for when it eventually occurs. Have you seen these tanks to eventually leak? I’m surprised they haven’t tried a one-piece tank.


Although some rowing machines are made of space-age, super-sweat-resistant metals, you still want to wipe off the equipment after a sweaty workout.  These machines are usually constructed with a lot of various materials and salty sweat can be very corrosive.  Keeping your rowing machine clean can go a long way toward extending its life, and its appearance.
Although the oar can be conveniently thought of as a lever with a "fixed" pivot point in the water, the blade moves sideways and sternwards through the water, so that the magnitude of the propulsion force developed is the result of a complex interaction between unsteady fluid mechanics (the water flow around the blade) and solid mechanics and dynamics (the handle force applied to the oar, the oar's inertia and bending characteristic, the acceleration of the boat and so on).
Great for weight loss, toning and building muscles, and increasing stamina, this machine is a fitness game changer. Rowers work out several major muscle groups and will help you develop both your upper and lower body. Most importantly, using a rowing machine gets your heart pumping and lungs working, providing a serious aerobic workout. Check out our top 10 benefits of using a rowing machine to see if a rower is the best way for you to get physical!
12 Month Financing: For a limited time, purchase $599 or more using the Amazon.com Store Card and pay no interest for 12 months on your entire order if paid in full in 12 months. Interest will be charged to your account from the purchase date if the promotional balance is not paid in full within 12 months. Minimum monthly payments required. Subject to credit approval. Apply now.
It provides a pretty impressive cardiovascular workout that will leave you feeling rejuvenated and empowered at the same time. This is a water resistance model that allows you to smoothly cut through water using all the major muscle groups, without putting unnecessary strain on the lower back and joints. This is the perfect workout for users who cannot participate in high impact workouts.
Unlike most other non-combat sports, rowing has a special weight category called lightweight (Lwt for short). According to FISA, this weight category was introduced "to encourage more universality in the sport especially among nations with less statuesque people". The first lightweight events were held at the World Championships in 1974 for men and 1985 for women. Lightweight rowing was added to the Olympics in 1996.
Rowing is one of the few non-weight bearing sports that exercises all the major muscle groups, including quads, biceps, triceps, lats, glutes and abdominal muscles. The sport also improves cardiovascular endurance and muscular strength. High-performance rowers tend to be tall and muscular: although extra weight does increase the drag on the boat, the larger athletes' increased power tends to be more significant. The increased power is achieved through increased length of leverage on the oar through longer limbs of the athlete. In multi-person boats (2,4, or 8), the lightest person typically rows in the bow seat at the front of the boat.
Perhaps one of the best rowing machine benefits is the workout they give the lower body. In fact, rowing enthusiasts consider rowing primarily a lower-body workout. The main leg muscles involved are the quads in the upper front of the thighs, however the calves and glutes (buttocks) also feel the burn. Building strong legs and glutes will help you look amazing and working out the lower body actually burns calories at a faster rate. In addition to improved muscle strength and tone, resistance training on a row machine is a great way to maintain flexibility and balance.
First launched in 1976, Concept 2 churns out high-quality equipment that can be found in gyms nationwide, as well as at the indoor world rowing championships. Elite athletes use Concept 2 machines to push them to new levels. The Model D is easy to use: on the performance monitor, just hit row to get going, and the air resistance flywheel increases its difficulty with a slight push or pull on the damper. To store, separate the machine at the middle, tuck away the arm and roll the resistance sphere to a closet or corner.
It provides a pretty impressive cardiovascular workout that will leave you feeling rejuvenated and empowered at the same time. This is a water resistance model that allows you to smoothly cut through water using all the major muscle groups, without putting unnecessary strain on the lower back and joints. This is the perfect workout for users who cannot participate in high impact workouts.
Most competitions are organized into categories based on sex, age, and weight class. While the fastest times are generally achieved by rowers between 20 and 40 years old, teenagers and rowers over 90 are common at competitions. There is a nexus between performance on-water and performance on the ergometer, with open events at the World Championships often being dominated by elite on-water rowers. Former men's Olympic single scull champions Pertti Karppinen and Rob Waddell and five-time Gold Medalist Sir Steven Redgrave have all won world championships or set world records in indoor rowing.
The WaterRower Natural is handcrafted in solid ash and stained honey oak for consistency of color. The wood was chosen due to its marvelous engineering properties, especially its ability to absorb sound and vibration, which enhances the WaterRower's quiet performance and smooth operation. Ash, like all woods used in the construction of the WaterRower, is a premium hardwood with incredible longevity and dimensional stability. In addition, the wood is harvested from replenishable forests and is hand finished with Danish oil to provide a deep luster.
Included within the "dynamically balanced" category are indoor rowers in which the footrests and flywheel are fixed to a moveable carriage, and also those in which the footrests alone are fixed to the moveable carriage, the carriage in both cases being free to slide fore and aft on a rail or rails integral to the stationary frame. The described device in which the flywheel is fixed to and moves with the carriage and footrests (the Rekers design) is sometimes referred to as a "floating head" rowing ergometer.
I have also received negative feedback about the resistance. After 15 minutes at the maximum level, you will feel that you are hardly putting an effort to row. However, this won’t be an issue if your weight is less. This could indicate an issue with the oil or gasoline mixture in the piston. Also, issues were mentioned by other customers with the footrests. They’d problem strapping their feet. It is a bigger issue as it becomes difficult for people who have small feet as the feet keeps on slipping. The footrest grip is not tight. This is affecting particularly when you would like to experience a workout without any interruption; when you actually want to go with the flow of workout. Fast rowing also becomes difficult with this type of problem as you have to stop and strap the feet back. However, the problem could be solved by using a wide and thick Velcro straps. Use your creativity and be resourceful while coming up with the ideas to solve the problem of slipping feet.
Braked flywheel resistance models comprise magnetic, air and water resistance rowers. These machines are mechanically similar since all three types use a handle connected to a flywheel by rope, chain, or strap to provide resistance to the user – the types differ only in braking mechanism. Because the handle is attached to the resistance source by rope or similarly flexible media, the trajectory of the hands in the vertical plane is free making it possible for the rower to emulate the hand height difference between the stroke and the return. Most of these models have the characteristic sliding seat typical of competitive on-the-water boats.
SquareTrade Protection Plans are only valid for new or Amazon certified refurbished products purchased at Amazon in the last 30 days. By purchasing this Protection Plan you agree to the Protection Plan Terms & Conditions (http://www.squaretrade.com/terms-standard). Your Protection Plan Terms & Conditions will be delivered via email within 24 hours of purchase

The First Degree Newport rower utilises water resistance for a more effective workout that’s low impact, so it’s gentle on the body. You’ll focus on building up all the major muscle groups as you use a machine that offers a very realistic rowing experience.To increase resistance flip the valve control to add more water to the paddle water tank. To decrease resistance, remove water from the tank and enjoy a less challenging stroke for the cool down or warm up a portion of your workout. The tank on the Newport can hold a minimum of nine litres of water and a maximum of seventeen litres.
John Duke, creator of the WaterRower, was inspired to try his hand at invention while working at a subsidiary for U.S. Steel. He wanted to make an indoor machine that felt as much like real rowing as possible, with a focus on aesthetics. It took him two years to get the design right, moving past failed ideas such as a flipper in the tank instead of a clutch. What began as a series of doodles at his desk turned into a sculptural piece of exercise equipment that upends expectations in two ways: by bringing water indoors, and by looking elegant and artful when stored.
The first known "modern" rowing races began from competition among the professional watermen in the United Kingdom that provided ferry and taxi service on the River Thames in London. Prizes for wager races were often offered by the London Guilds and Livery Companies or wealthy owners of riverside houses.[10] The oldest surviving such race, Doggett's Coat and Badge was first contested in 1715 and is still held annually from London Bridge to Chelsea.[12] During the 19th century these races were to become numerous and popular, attracting large crowds. Prize matches amongst professionals similarly became popular on other rivers throughout Great Britain in the 19th century, notably on the Tyne. In America, the earliest known race dates back to 1756 in New York, when a pettiauger defeated a Cape Cod whaleboat in a race.[13]
John Duke, creator of the WaterRower, was inspired to try his hand at invention while working at a subsidiary for U.S. Steel. He wanted to make an indoor machine that felt as much like real rowing as possible, with a focus on aesthetics. It took him two years to get the design right, moving past failed ideas such as a flipper in the tank instead of a clutch. What began as a series of doodles at his desk turned into a sculptural piece of exercise equipment that upends expectations in two ways: by bringing water indoors, and by looking elegant and artful when stored.
Rowing technique on the erg broadly follows the same pattern as that of a normal rowing stroke on water, but with minor modifications: it is not necessary to "tap down" at the finish, since there are no blades to extract from water; but many who also row on water do this anyway. Also, the rigid, single-piece handle enables neither a sweep nor a sculling stroke. The oar handle during a sweep stroke follows a long arc, while the oar handles during a sculling stroke follow two arcs. The standard handle does neither. But regardless of this, to reduce the chance of injury, an exercise machine should enable a bio-mechanically correct movement of the user. The handle is the interface between the human and the machine, and should adapt to the natural movement of the user, not the user to the machine, as is now the case. During competitions an exaggerated finish is often used, whereby the hands are pulled further up the chest than would be possible on the water, resulting in a steep angulation of the wrists - but even with a normal stroke, stop-action images show wrist angulation at the finish, evidence that the standard rigid, single-piece handle does not allow the user to maintain a bio-mechanically correct alignment of hands, wrists, and forearms in the direction of applied force. On the Concept 2 website "Forum", many regular users of the indoor rower have complained of chronic wrist pain. Some have rigged handgrips with flexible straps to enable their hands, wrists, and forearms to maintain proper alignment, and thereby reduce the possibility of repetitive strain injury. Rowing machine manufacturers have ignored this problem.
The recovery phase follows the drive. The recovery starts with the extraction and involves coordinating the body movements with the goal to move the oar back to the catch position. In extraction, the rower pushes down on the oar handle to quickly lift the blade from the water and rapidly rotates the oar so that the blade is parallel to the water. This process is sometimes referred to as feathering the blade. Simultaneously, the rower pushes the oar handle away from the chest. The blade emerges from the water square and feathers immediately once clear of the water. After feathering and extending the arms, the rower pivots the body forward. Once the hands are past the knees, the rower compresses the legs which moves the seat towards the stern of the boat. The leg compression occurs relatively slowly compared to the rest of the stroke, which affords the rower a moment to recover, and allows the boat to glide through the water. The gliding of the boat through the water during recovery is often called run.
The Water Rower comes partly preassembled in two large boxes. The assembly instructions are reasonably good, and as long as you take your time and follow them carefully (read all the text) it takes about 45 minutes from opening the first box to trying it out. I bought bottles of distilled water to fill it, which made it easy to fill using the included funnel & hose.
"This is Lauren Ruck. I met you at the Flagstaff rowing clinic, and had dinner with you at the Ray's. I just wanted to say thanks again for coming out. You did such a wonderful job. The gym was buzzing for days about you and how great a time they had. You are a talented coach, and a great motivator. As a trainer myself I am always watching other coaches to see how they train and interact with a group. You have a wonderful way of engaging the group, keeping everyone's attention, and keeping the mood fun. I think that is the one thing that really stood out about you was the positive way you spoke to everyone. You had a way of being focused yet still light hearted. It was inspiring watching you coach, thank you."
If you’re interested in using a rowing machine for focused training — whether for outdoor rowing, an indoor competition, or as part of a larger fitness program — you’ll want air resistance. If you’re drawn to rowers for the enjoyability (alongside the full-body, cardio-plus-strength training efficacy) of a rowing workout, consider a machine with water resistance.
×